Fabrication Designs - BR/FE Pair with Mullion and Frame (FDI260MF-BR-2 and FDI260MF-BR-3)
Product: Fabrication Designs BR/FE Single Swing Door and Frame (FDI260MF-BR-2 and FDI260MF-BR-3) 90 Min PP
for use in Masonry Walls.
CATEGORY D - DOOR/FRAME ASSEMBLIES
Limitations
- Maximum Door Opening Size: 7'-0" wide by 8'-5" high
- Maximum Subframe Opening Size: 7’-9 1/2” wide by 8’-9 3/4” high
- Nominal Door Thickness: 2"
- Swing: Standard Pair
- Listed Door and Frame are for use together as an assembly (Category D).
- For use in Masonry Walls
- Edge Seal Required
Evaluated to the following
Unless otherwise noted, the product listed above in this section has been evaluated for conformance to the following standards:
- UL 10C – Positive Pressure Fire Test of Door Assemblies
- NFPA 252 – Fire Test of Door Assemblies
- CAN/ULC S104 – Standard Method for Fire Test of Door Assemblies
Note: This assembly has been tested and passed in both the in-swing and out-swing applications.
