FIRE RESISTANT PRODUCTS & COMPONENTS
CATEGORY A - DOORS – NO ADDITIONAL EDGE-SEALING SYSTEM REQUIRED
PRODUCT COVERED
DKS Steel Door and Frame Systems, Inc. - DKS Min Single Leaf Steel Glazed Door
Door Model: 1000, 1100, 1200, 1600, 1700, 1800, 1900, SP1900
PRODUCT DESCRIPTION
The door leaf is glazed with nominal 5 mm thick listed glass panel. 10 mm wide by 2 mm thick fire-rated glazing tapes is required around the perimeter of glazing on both side of the glazing such that it is approved for fire-rated duration equal to or greater than the respective glazing product it is used with.
Maximum Door Leaf size: 1214 mm wide x 2426 mm high
Maximum Glazing size*: 1802 mm wide x 887 mm high, 1.60 sq. m area
Maximum Visible size*: 1778 mm wide x 863 mm high, 1.53 sq. m area
Minimum Bite: 12.7 mm
Minimum distance between glazed and door edges: 279 mm for top and bottom, 130.5 mm for left and right.
*Note: Listed glazing size and visible size restrictions as per glazing manufacturer's instructions must be applied.
Hardware Limitations:
Listed Mortise Lock / Cylindrical Lock with minimum latch bolt throw of 1/2".
Minimum one single point standard latching on the leaf.
Configuration Maximum Size
Single Swing - 1214 mm wide x 2426 mm high
Standard Pairs - Not allowed.
Double Egress - Not allowed.
This door is eligible for use with DKS - 45 Min Steel Door Frame.
The door noted above is eligible to bear the "S" (for Smoke & Draft Control assemblies) if a listed "Category H - Smoke & Draft Control Gasket" has been applied to the assembly. Please refer to Category H for individual gasket manufacturer's listings.
The product noted above has been tested and qualified per UL 10B, UL10C, NFPA 252 and CAN / ULC S104 for a 45 Minutes Positive Pressure Fire Rating.
