The Masonite ASTM F3561 Door System is a Forced Entry Resistant door and frame system comprised of a fiberglass-skin door, wood frame, and Endura Panolock+ multi-point lock.
Forced Entry Resistance Rating
| Assembly Type |
Permitted Size |
ASTM F3561 Rating |
| Single Inswing |
Frame: 37.5 in. x 82 in.
Door: 36 in. x 80 in. |
Level 2 |
| Configuration |
Door: Masonite Belleville 6-panel Foam-filled Fiberglass-skin Door
Frame: Endura 4.56-inch Finger-jointed Pine Frame
Latching Hardware: Endura PanoLock+ 3-point Lock
Hinges: (3) Penrod 4 x 4.25 x 0.098-inch hinges |
| Anchoring* |
Frame: (3) #8 x 2.5-inch wood screws in hinge jamb, 6 inches from ends and at center hinge location. (4) #8 x 2.5-inch wood screws in strike jamb, 6 inches from ends and 2.5 inches above/below primary strike location.
Hinges: (3) #10 x 1-inch wood screws and (1) #10 x 2.5-inch wood screw
Strikes: (2) #8 x 3-inch wood screws and (2) #8 x 0.5-inch wood screws |
*Testing was conducted with the door and frame assembly installed in typical residential wall construction with a 0.25-inch shim space and (2) nominal 2x4 wood studs at each jamb. Design of the wall framing is outside the scope of this listing.
