Intertek Directory of Building Products

Search and view information on the Directory of Building Products, including Product Listings, Code Compliance Research Reports (CCRRs), Certificates of Compliance (COCs), Quality Assurance, and Industry Programs.

Company ▲Listed ProductSpec IDStandardMore
Dunbarton CorporationDunbarton 3 Hour Hollow Metal Kerfed Door Frame27341CAN / ULC S104 (2010);
CAN / ULC S104 (2015) (R2020);
NFPA 252 (2017);
UL 10(c) (2009);
UL 10(c) (2016)
Dunbarton CorporationDunbarton 45 Min Steel Door Frame with Sidelights/Transom/Borrowed Lights25046CAN / ULC S104 (2010);
CAN / ULC S104 (2015) (R2020);
NFPA 252 (2017);
UL 10(b) (2008) (R2015);
UL 10(b) 2008 (R2009)
Dunbarton CorporationDunbarton 45 Minute Steel Doorframe with Sidelights (PP)25050CAN / ULC S104 (2010);
CAN4 S104 (1985);
NFPA 252 (1999);
UBC 7-2 (1997);
UL 10(c) (R2001)
Dunbarton CorporationDunbarton 60 Minute Borrowed Light Frame Assembly18494NFPA 257 (2000);
UBC 7-4 (1997);
UL 9 (2000)
Dunbarton CorporationDunbarton Rediflex® 20-90 Min Adjustable Steel 20 Gauge Doorframe PP25048CAN / ULC S104 (2010);
CAN4 S104 (1985);
NFPA 252 (2008);
UL 10(c) (2009)
Dunbarton CorporationDunbarton Rediflex® 20-90 Min Adjustable Steel Doorframe NP19761NFPA 252 (2008);
UL 10(b) 2008 (R2009)
Dunbarton CorporationDunbarton Rediflex® 20-90 Min Adjustable Steel Doorframe PP25045CAN / ULC S104 (2010);
CAN4 S104 (1985);
NFPA 252 (2008);
UL 10(c) (2009)
Dunbarton CorporationDunbarton Rediframe® 20-90 Minute Steel Fire Doorframe NP25049CAN / ULC S104 (2010);
CAN4 S104 (1985);
NFPA 252 (1999);
NFPA 252 (2012);
UL 10(b) (1997);
UL 10(b) 2008 (R2009)
Dunbarton CorporationDunbarton Rediframe® 20-90 Minute Steel Fire Doorframe PP28647CAN / ULC S104 (2015) (R2020);
NFPA 252 (2012);
NFPA 252 (2017);
UL 10(c) (2009);
UL 10(c) (2016)
Items Per Page:
9 Results Found
Copy direct link

Certifications to Canadian Standards are supported by Standards Council of Canada accreditation File Number 10014

All downloaded documents included in this product directory must be reproduced in their entirety. Partial reproduction,excerpting, modification, or omission of any portion of the original document are to be considered invalid.

Design Listings are intended to provide guidance for on-site verification of the installation of system components and shall not be used in place of the manufacturer’s published installation instructions. The manufacturer is solely responsible for providing installation instructions and requirements that ensure compliance with the system as tested and evaluated by Intertek.

Compliance of the assembly described in a Design Listing with the referenced standard(s) is contingent upon verification that the field-constructed assembly is consistent with the assembly described herein. Intertek-certified products may be verified by the authorized Intertek label. Products not bearing the Intertek label shall be verified by the Authority Having Jurisdiction as meeting the specifications stated herein.

Design Listings are provided pursuant to the agreement between Intertek and its Client. Intertek’s responsibility and liability are limited to the terms and conditions of that agreement. Intertek assumes no liability to any party other than the Client, in accordance with the agreement, for any loss, expense, or damage arising from the use of these documents. Only the Client is authorized to permit copying or distribution of a Design Listing, and only in its entirety. Partial reproduction or distribution of excerpts is prohibited.

Refer to the listing report in the Directory of Building Products (https://bpdirectory.intertek.com) for the applicable edition of the referenced standard(s).